Axis-communications Axis 211A User Manual download pdf (Page 51)

AXIS 210A/211A - System Options

UPnP™

The cameras includes support for UPnP™. UPnP™ is enabled by default, and the network

camera then is automatically detected by operating systems and clients that support this

protocol. If also enabled on your computer, the camera is automatically detected and a new

icon is added to “My Network Places.”

Note:

UPnP must also be enabled on your Windows XP or ME computer. To do this, open the Control Panel from

the Start Menu and select Add/Remove Programs. Select Add/Remove Windows Components and open

the Networking Services section. Click Details and then select UPnP as the service to add.

RTP

These settings are for the IP addresses, port numbers, and Time-To-Live values to use for

media streams in the MPEG-4 format. Only certain IP addresses and port numbers should

be used for these streams. For more information, please see the online help.

Bonjour

Your Axis network camera includes support for Bonjour. When enabled, the camera is

automatically detected by operating systems and clients that support this protocol.

Ports & Devices

I/O Ports - the pinout, interface support and the control and monitoring functions

provided by this connector are described in The I/O Terminal Connector, on page

55.

LED

The Status indicator LED on the front of the camera can be set to flash at a configurable

interval (or to not light up at all) whenever the unit is accessed. For a listing of all LED

behavior, see page 8, or the online help.

Note:

The LED does not flash when the stream is retrieved using MPEG-4 multicast.

Maintenance

• Restart - the camera is restarted without changing any of the settings. Use this

method if the unit is not behaving as expected.

• Restore - the unit is restarted and most current settings

are reset to factory default

values. The settings that are reset are as follows:

• the boot protocol (DHCP or static)

•

the static IP address

• the default router

•the subnet mask

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 75 76

No comments

Axis-communications Axis 211A User Manual Page 51