Axis Communications FD-R M12 User Manual download pdf (Page 33)

AXIS 209FD/FD-R/FD-R M12

4. After the upgrade has completed (1-10 minutes), the unit will automatically restart and show a steady

green on the Power and Status LEDs and flashing green or amber on the Network LED.

5. Referring to the installation guide, reinstall the camera.

6. Windows - If you are using a DHCP server, type the following from a command/DOS prompt:

arp -d <IP address of camera>

If the emergency recovery procedure does not get the camera up and running again, please contact Axis

support at www.axis.com/techsup/

Axis Support

If you contact Axis support, please help us to help you solve your problems, by providing the server report,

the log file and a detailed description of the problem.

Server Report - go

to Setup > System Options > Support Overview. The server report contains important

information about the server and its software, as well as a list of the current parameters.

The Log

file is available from Setup > System Options > Logs & Reports. The Log file records events in the

unit since the last system restart and can be a useful diagnostic tool when troubleshooting.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 44 45

No comments

Axis Communications FD-R M12 User Manual Page 33