Axis Communications FD-R M12 User Manual download pdf (Page 9)

AXIS 209FD/FD-R/FD-R M12

Setting the root password

1. When accessing the camera for the first time, the

‘Configure Root Password’ dialog will be displayed on

the screen.

2. Enter a password and then re-enter it, to confirm the

spelling. Click OK.

3. The ‘Enter Network Password’ dialog will appear. Enter

the User name: root

Note: The default administrator user name root is permanent and cannot be deleted or altered.

4. Enter the password as set in step 2 above, and click OK. If the password is lost, the camera must be

reset to the factory default settings. See Resetting to the factory default settings, on page 30.

5. If required, click Yes to install the AXIS Media Control (AMC). You will need administrator rights

on the computer to do this.

Accessing the camera from the Internet

Once installed, the camera is accessible on your local network (LAN). To access the camera from the Internet

you must configure your broadband router to allow incoming data traffic to the camera. To do this, enable

the NAT-traversal feature, which will attempt to automatically configure the router to allow access to the

camera. This is enabled from Setup > System Options > Network > TCP/IP Advanced.

For more information, please see NAT tr

aversal (port mapping) for IPv4, on page 26. See also the AXIS

Internet Dynamic DNS Service at www.axiscam.net or, for

Technical notes on this and other topics, visit the

Axis Support Web at www.axis.com/techsup

The Live View page

Depending on whether or not the Live View page has been customized, the buttons described below may or

may not be visible.

The Video format drop-d

own list allows the video format on the Live View page to be

temporarily changed.

The manual Trigger button can trigger an event

directly from the Live View page. This is

configured from Setup > Live View Config > Layout.

The Snapsh

ot button saves a snapshot of the video image currently being displayed.

Right-click on the video image to save it in JPEG format on your computer. This button

is primarily intended for use when the AMC viewer toolbar is not available.

The AMC (AXIS Medi

a Control) viewer toolbar is available in Microsoft Internet Explorer only. It

displays the following buttons:

The Play/Stop button starts and

stops the live video stream.

The Snapshot

button saves a snapshot of the video image currently being displayed. The

Snapshot function and the target directory for saving snapshots can be configured from

the AMC Control Applet in the Windows Control Panel (Internet Explorer only).

Click the View Full Screen button to make the video image fill the entire screen

area. No

other windows will be visible. Press Esc (Escape) on the computer keyboard to exit full

screen.

Click the Record button to

start an MPEG-4 recording (only available when viewing

MPEG-4).

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 44 45

Comments to this Manuals

No comments

Axis Communications FD-R M12 User Manual Page 9

Comments to this Manuals

Related products and manuals for Security cameras Axis Communications FD-R M12